The AIV-TGH7B Fanless Vehicle 11th Gen Intel Core I Series processor is a fanless computer for in-vehicle and edge computing applications.

• Intel® 11th Generation Core™ i7/i5/i3 Processor
• DDR4 3200 SODIMM, up to 32GB
• Support 2.5GbE, USB 3.2 Gen2 x 4
• Triple Display : HDMI 2.0b x 1 , DP++ 1.2a x 2
• Two front easy access 2.5” SATA III storage bay
• Wide Temperature design : -40°C to 65°C
• Wide Voltage Power Input : 9-24Vdc
• Fanless design

The DEV-710AIL-NANO NVIDIA Jetson Nano AI Development Kit. The MIC-710AIL-DVA1 supports deep learning trained models.

• NVIDIA Jetson Nano embedded
• Quad-Core ARM Cortex A57 MPCore NEON
• Maxwell 128 CUDA Core Vulkan 1.1 GPU
• Linux OS with BSP (board support package)
• Supports deep learning trained models

The DEV-IIOTC Industrial Microcontroller Development Kit is based on EMAC’s CutiPy™ which is an ultra-low power Microcontroller-based Single-Board-Computer “SBC” system. This Battery powered system is a low-power Industrial IoT Node, ready to get upload data from your system to the cloud. The SoM-iMX6U is based on the STMicroelectronics STM32F407IGH6 ARM Cortex-M4 processor. Bring your system up to Industry 4.0 IIoT connectivity with the simple incorporation of the CutiPy™ to your existing product.

• STMicroelectronics ARM Cortex-M4 168 MHz Low Power
• 192 KB of SRAM, Up to 1M of Flash
• Low running power consumption
• up to 64x GPIO, 4x Serial Ports, 2x USB, SDIO, A/D, SPI, I2C & 2x CAN
• MicroPython, FreeRTOS or EMAC OE Linux Operating system installed

Designed and manufactured in the USA, the DEV-IOT6U development kit is your IOT starting point. Based on EMAC’s SoM-iMX6U which is an ultra low power System on Module (SoM) plugged into the EMAC SOM-112ES carrier board that contains all the connectors and I/O required for a system. The SoM-iMX6U is based on the Freescale/NXP i.MX6 UltraLite Cortex A7 processor and has ARM Sleep Mode of 3.5mA. Price based on following specifications: IOT Development kit, SOM-IMX6U & SOM-112ES, IMX6U 528MHz, 128MB RAM, 4GB eMMC Flash, 4x COM, 2x USB OTG, 10/100 LAN, WiFI, Bluetooth.

• Freescale ARM Cortex A7 iMX6 UltraLite 528Mhz Processor
• 3.5mA APM Sleep
• Low running power consumption
• 3x serial ports, 3x USB 2.0 ports
• IIoT Gateway processor

The DEV-SOM36 PTP IEEE 1588V2 Development Ki,  has the TI DP83640 IEEE 1588 PTP PHYTER onboard, including an optional 4.3 inch WQVGA (480 x 272) TFT color LCD and a resistive touch screen for HMI applications.

• Dual TI DP83640 PTP IEEE-1588v2 Precision Time Protocol PHY
• Atmel ARM Cortex A5 ATSAMA5D36 536MHz
• EMAC OE Linux, Real-time extensions

ECU-150 NXP IMX8 Industrial ARM IOT Gateway is a revolutionary device that is specially designed for limited physical space and temperature concerns.

• NXP i.MX8M Quad Core Processor
• 1.3GHz ARM Cortex-A53
• 2GB DDR4 RAM, 16 GB eMMC onboard

Preliminary- IOT-1176P is a dual-purpose SBC board based on NXP’s i.MX RT1176 processor.

• NXP i.MX RT1176 Processor
• Arm Cortex-M7 @1GHz & Arm Cortex-M4F @400MHz
• Fast Real-time, low-latency response (12ns)
• 2D GPU and Graphics Accelerator
• MicroPython, FreeRTOS or EMAC OE Linux

The CutiPy is based on the STMicroelectronics STM32F407IGH6 which is an ARM Cortex-M4 processor running at 168MHz; with 192KB of SRAM, 1MB of internal flash and provides an SD card slot for additional storage.

• STMicroelectronics ARM Cortex-M4 168 MHz Low Power
• 192 KB of SRAM, Up to 1M of Flash
• upto 64x GPIO, 4x Serial Ports, 2x USB, SDIO, A/D, SPI, I2C & 2x CAN
• Wifi, Bluetooth 5
• LCD & Pushbuttons (Optional)
• Rechargeable Battery Backup
• MicroPython, FreeRTOS or EMAC OE Linux

Preliminary – The iPac-35D1 is a high-end Edge IIoT Gateway ARM64 SBC “Single Board Computer”, Industrial temperature operation web-enabled SBC based on the NuvoTon NuMicro® MA35D1 with dual 64-bit Arm® Cortex®-A35 cores and one 180 MHz Arm® Cortex®-M4 core. Designed and manufactured in the USA by EMAC, Inc; this Microcontroller replacement SBC is an ideal IIoT Edge Gateway system.

• NuvoTon Dual-Core ARM Cortex A35 800MHz & one 180Mhz Cortex M4 Processor
• Up to 16 GB of eMMC Flash & 512MB of DDR3L RAM
• Dual Ethernet (1x 1000 BaseT & 1x 100 BaseT)
• 36x GPIOs & 8 High Drive Outs; A/D, SPI, I2C, i2S, & CAN
• 3x Serial RS232 Ports & 1 RS485 Port
• 2x High Speed USB Ports & 1x SD Card Socket

The iPac-9X25 is an Embedded ARM SBC, Industrial temperature operation web-enabled microcontroller. Made in the USA this industrial strength embedded single board computer is based on Atmel AT91SAM9X25 Processor.

• Atmel AT91SAM9x25 400 Mhz Processor with 133 Mhz System Bus
• 16MB serial Flash, 128MB DDR2 RAM and 4GB eMMC
• 20 General Purpose SAM9x25 Digital I/O lines, 16 SPI I/O Expander Based Digital I/O lines, and 8 High Drive Digital Outputs
• -40°C to +85°C

SIB-A2150, an intelligent, fanless embedded system powered by Intel Core i3 3217UE/i7 3517UE Dual Core high performance processor with multiple I/O interface.

• Intel Core Processor i7 3517UE 1.7GHz or i3 3217UE 1.6GHz
  
• Up to 8GB DDR3 SODIMM
• up to 4x RS-232/422/485
• Up to 3x USB 3.0 & 4x USB 2.0 

SIB-A2151 is an industrial grade dual core mobile device for in vehicle computer and in vehicle NVR solution. SIB-A2151 support Full-HD NVR solutions and is fully integrated certified hardware and intelligent management software design.

• Intel® Celeron 2980U 1.6GHz / Core i5-4300U 1.9 GHz SoC
• Up to 8GB DDR3L SODIMM
• 2x RS-232/422/485
• 2x USB 3.0 & 2x USB 2.0 Ports

Not recommended for new Projects, NRND – The BOXER-8110AI is an Embedded Server fitted with the NVIDIA Jetson TX2, it supports 256 CUDA cores and a range of AI frameworks including Tensorflow, Caffe2, and Mxnet, and in addition, users can install the device with their own AI inference software. Product #: SIB-A8110-0A1-R

• NVIDIA Jetson TX2
• HMP Dual Denver 2 + Quad ARM A57
• 8GB LPDDR4, 32GB eMMC 5.1
• HDMI 2.0, 2x USB3.0
• RS-232 & CANBUS

The BOXER-8120AI (SIB-A8120) is an Embedded Server fitted with the NVIDIA Jetson TX2, it supports 256 CUDA cores and a range of AI frameworks including Tensorflow, Caffe2, and Mxnet, and in addition, users can install the device with their own AI inference software. These features make the SIB-A8120 perfect for edge AI applications.

• NVIDIA Jetson TX2
• HMP Dual Denver 2 + Quad ARM A57
• 8GB LPDDR4, 32GB eMMC 5.1
• HDMI 2.0

The FWS-2271 is an affordable, high-performance Network Appliance designed to address the needs of home offices, small and medium businesses, and branch offices.

• Intel® N3350 Processor SoC
• Up to 8 GB DDR3L SODIMM
• 6x 10/100/1000Base-TX Ethernet Port
• 1x CFast™ Socket, 1x 2.5″ drive
• 2x Mini-Card Slot (USB Signal only with SIM Socket x 1)
• SIB-FW271-006R

The SIB-IS270 is a rugged hardware network platform that is powered by the Intel® Apollo Lake.

• Intel® N3350 Processor SoC
• Up to 8 GB DDR3L SODIMM
• 6x 10/100/1000Base-TX Ethernet Port
• 1x CFast™ Socket, 1x 2.5″ drive
• 1x Mini-Card Slot  with SIM Socket
• Product #: SIB-IS270-000R

The SIB-U3115 system is an ultra compact PC standard that we want to be the future of computing.

• Intel® Atom™ E3826 1.46GHz Dual Core
• DDR3L SODIMM Socket
• 1x RS-232 or 1x RS-422/485
• 1x USB 3.0 Port, 2x USB 2.0 Ports
• 1x HDMI, 1x µHDMI, 1x VGA
• 2x Gigabit Ethernet

Preliminary – The SoM-35D1F is an ARM64 System on Module (SoM) based on the NuvoTon NuMicro® MA35D1 with dual 64-bit Arm® Cortex®-A35 cores and one 180 MHz Arm® Cortex®-M4 core. Designed and manufactured in the USA by EMAC, Inc; this This Industrial Temperature dual-core 800MHz SoM utilizes 32MB of Serial Data Flash, 4GB of eMMC Flash (up to 64GB optional) and has 512MB of DDR3L RAM built into the MA35D1 processor.

• NuvoTon 800MHz ARM Cortex-A35 Dual-Core CPU
•    Includes 180Mhz Cortex-M4 CoProcessor
• 4/16GB of eMMC Flash & 512MB of DDR3 RAM
• 24-bit LCD Controller with Resistive Touch
• 4x CSI Lanes
• Dual Ethernet, 4x Serial Ports
• Wide Temperature -40 to +85

Preliminary- The SOM-950AX NVIDIA AGX Orin Carrier board is an Industrial temperature Carrier board for NVIDIA Jetson AGX Orin offers 3x USB 3.2 Type-C ports, Dual-Gigabit LAN ports, M.2 2280 M-Key NVMe slot for storage and an M.2 2230 E-Key slot for expansion on a minimal sized carrier board.. The SOM-950AX Carrier for Jetson AGX Orin™ is a compact sized full-featured carrier board specifically designed for commercially deployable platforms.

FEATURES

• NVIDIA Jetson AGX Orin embedded
  • NVIDIA 699 pin B2B Connector
• 1x M.2 2280 M-Key NVMe for storage
• 2x 1000 BASE-T LAN RJ45 (Dual Gigabit Ethernet)
• 8x MIPI-CSI2 2-LANE or 4x MIPI-CSI2 4-LANE Cameras)
• 3x USB 3.2 Type-C, 1x USB OTG, 1x UART, 1x CAN-FD

The SOM-AGX202 Rogue Carrier for Jetson AGX Orin™ is a full featured carrier board specifically designed for commercially deployable platforms.

FEATURES

• Commercially deployable NVIDIA Jetson AGX Orin or AGX Orin Industrial
• 2048 Core Ampere GPU with 64 Tensor Cores and bringing 248 TOPS+ (Jetson AGX Orin Industrial)
• This AI ready Carrier board brings the processing abilities to launch the next generation of AI systems
• Linux OS with BSP (board support package)
• Supports deep learning trained models