Mini-ITX Qseven V2.1 Carrier Board
Development board for RISC Qseven module series
| Name | ROM-DB7503-SCA1E |
|---|---|
| Price | Call |
| ATTRIBUTES | |
| Form Factor | ITX |
| SOM Connection | Qseven 2.1 module Carrier Board |
| Storage | 2x SATA connector |
| Serial | 1x 4-wire RS-232 DB9 |
| Other Serial | SPI, I2C |
| USB 2.0 | – |
| USB 3.0 | 1 USB mini Type B (OTG), 3 USB 3.0 Type A |
| Ethernet | 1 GbE with RJ45 connector |
| Expansion slots | 1 PCIe by 3 |
| GPIO | 1x 2 port phone jack, support Line-in, Line-out |
| Audio | Support Line-out(L/R), MIC (Realtek ALC892) |
| Video | 1x HDMI 2.0 TypeA, 2x Single 24-bit LVDS |
| Voltage | 2 Power Inputs (+12V DC-Jack, Lithium-ion battery) |
| Temperature | (0°C to 60°C) |
| FORM FACTOR | Mini-ITX, QSeven |
|---|---|
| FOR USE WITH | Qseven V2.1 RISC |
| DISK INTERFACE | 1x SD card slot, 2x SATA |
| AUDIO | 1x 2 port phone jack, support Line-in , Line-out |
| VIDEO OUT | 1x HDMI 2.0 Type A, 2x Single 24-bit LVDS |
| TOUCH | see datasheet |
| FILTER EXPANSION | PCIe, M.2 |
| ETHERNET | 1x 1000 Base-T Ethernet |
| SECOND ETHERNET | NA |
| WIRELESS NETWORKING | see datasheet |
| SERIAL PORTS | 1x 4-wire RS-232 DB9, 1x RS-232/422/485 DB9 |
| USB 3.0 | 3x USB 3.0 Type A |
| USB 2.0 | NA |
| USB Device/OTG | 1 USB mini Type B (OTG) |
| CAN | 1x CAN bus 2.0B DB9, Differential mode +5V |
| I2C | 1 pin header |
| SPI | 1 pin header |
| GPIO | 1 pin header |
| SDIO | see datasheet |
| TIMERS/ COUNTERS/ PWM | NA |
| A D CHANNELS | NA |
| A/D RESOLUTION | NA |
| ANALOG MISC. | NA |
| OTHER I/O | I2S 1 pin header |
| EXPANSION | 1 PCIe by 3, M.2 2230 Key E |
| SIZE | 6.7" x 6.7" (170 x 170 mm) |
| VOLTAGE | 12V |
| POWER MISC. | 2 Power Inputs (+12V DC-Jack, Lithium-ion battery) |
| LOW OPERATING TEMPERATURE | 0°C (32°F) |
| HIGH OPERATING TEMPERATURE | 60°C (140°F) |
| UPPER OPERATING HUMIDITY | 90% relative humidity, non-condensing |
| ENVIRONMENTAL MISC. | NA |
ROM-DB7503 ARM Qseven Carrier Board is a Mini-ITX Qseven V2.1 Carrier Board for ARM/RISC CPU QSeven Modules
Development board for RISC ARM Qseven module series
___________________________________________________________________________
EMAC is a global leader in system on module and carrier board embedded systems. The System on Module (SoM) is an ideal alternative to custom engineering. With the SoM approach you get the best of aspects of both buying an Off-The-Shelf Embedded Single Board Computer (SBC) and a Custom Engineered solution. With Off-The-Shelf embedded components such as a generic carrier board and SOM module, it is possible to start development on your software applications before the custom carrier board is complete; thus offering a reduced time to market for your system. A System on Module (SoM) is comprised of a small processor module with CPU bus accessibility and standard I/O functionality. The SoM module does not have any connectorization and is designed to be plugged into a Carrier Board.
| MANUALS |
|---|
| DATA SHEETS |
|---|
