SoM-215GS PTP IEEE 1588 v2 Carrier Board

The SoM-215GS is an ultra compact SoM Carrier/Base/Socket board, designed with the TI DP83640 IEEE 1588 PTP PHY onboard, with an optional 4.3 inch WQVGA (480 x 272) TFT color LCD and a resistive touch screen. The dimensions of the SoM-215 are 4.8″ by 3.0″, about the same dimensions as that of popular touch cell phones. The SoM-215GS is small enough to fit in a 2U rack enclosure. This versatile SoM Carrier/Socket board is ideal for evaluation and early development work. This Carrier is designed to work with all EMAC 200-pin SODIMM type SoMs. Note: The SoM-215 is specifically designed for SoMs with Video & USB capability.

Product Variations

Name SoM-215GS-000 SoM-215GS-002
Price Call Call
ATTRIBUTES
Formfactor PITX PITX
SOM connection 200-Pin 200-Pin
Storage Micro-SD Micro-SD
Serial 4x Serial Ports (3x RS232 & 1x RS232/422/485) 4x Serial Ports (3x RS232 & 1x RS232/422/485)
Other Serial 1x SPI, 1x I2C, 1x CAN 1x SPI, 1x I2C, 1x CAN
USB2.0 2x USB 2.0 2x USB 2.0
USB Device/OTG 1x USB OTG 1x USB OTG
Ethernet 10/100/1000 Ethernet 10/100/1000 Ethernet
Second Ethernet PHY 10/100 IEEE PTP LAN 10/100 IEEE1588 PTP LAN
TIMERS/ COUNTERS/ PWM 2x Timer/Counters/PWM 2x Timer/Counters/PWM
GPIO 26x GPIO 26x GPIO
Audio I2S Audio port with Line-In/Line-Out I2S Audio port with Line-In/Line-Out
Analog 4x A/D Channels 4x A/D Channels
Analog Resolution 12-bit A/D Resolution 12-bit A/D Resolution
Analog Voltage 0-3.3v 0-3.3v
Video NO LCD 4.3″ LCD and bracket (Open frame Panel PC)
Touchscreen 4-wire resistive touch 4-wire resistive touch
Temperature 0° to 60°C 0° to 60°C

Additional information

FORM FACTOR

200-PIN

FILTER ETHERNET

1x 1000BASE-T (Gigabit), 1x 10/100BASE-T

FOR USE WITH

SoM-A5D36, SOM-A536P

FILTER TEMPERATURE RANGE

Commercial < ( 0° to 60°C), Extended ~ (-20° to 80°C)

DISK INTERFACE

MicroSD Flash Slot

AUDIO

I2S Audio port with Line-In/Line-Out

VIDEO OUT

4.3 inch Graphic LCD Interface for TFT WQVGA (480×272) (optional)

TOUCH

Yes (Optional)

ETHERNET

1x 1000 Base-T Ethernet

SECOND ETHERNET

1x 10/100 DP83640 IEEE 1588 v2 PTP Real Time PHY

WIRELESS NETWORKING

NA

SERIAL PORTS

4x Serial Ports (3x RS232 & 1x RS232/422/485)

USB 3.0

None

USB 2.0

2x USB 2.0

USB Device/OTG

1x USB OTG

CAN

1x CAN 2.0B Port

I2C

1x I2C

SPI

1x SPI

GPIO

22x gpio

SDIO

NA

TIMERS/ COUNTERS/ PWM

2x Timer/Counters/PWM

A D CHANNELS

4x A/D Channels

A/D RESOLUTION

12-bit A/D Resolution

ANALOG MISC.

NA

OTHER I/O

NA

EXPANSION

NA

SIZE

4.8" ×3" (121mm × 76mm)

VOLTAGE

5V

POWER MISC.

NA

LOW OPERATING TEMPERATURE

0° C

HIGH OPERATING TEMPERATURE

60°C (140°F)

UPPER OPERATING HUMIDITY

90% relative humidity, non-condensing

ENVIRONMENTAL MISC.

see datasheet

Description

The SoM-215GS is an ultra compact SoM Carrier/Base/Socket board, designed with the TI DP83640 IEEE 1588 PTP PHY onboard, with an optional 4.3 inch WQVGA (480 x 272) TFT color LCD and a resistive touch screen. The dimensions of the SoM-215 are 4.8″ by 3.0″, about the same dimensions as that of popular touch cell phones. The SoM-215 is small enough to fit in a 2U rack enclosure. This versatile SoM Carrier/Socket board is ideal for evaluation and early development work. This Carrier is designed to work with all EMAC 200-pin SODIMM type SoMs. Note: The SoM-215 is specifically designed for SoMs with Video & USB capability.

Standing above other SODIMM Carrier board options the SOM-215GS has a second Ethernet Phy ready for Precision Time Protocol (PTP) IEEE-1588 v1 and v2. The Texas Instruments TI DP83640 Real Time PHY offers many features to support Real time PTP networking as well as low latency time synchronization. To access this PHY the SOM-A5D36 is required. IEEE 1588 Standards are known as Precision Clock Synchronization Protocol for Networked Measurement Control Systems, or PTP for short. IEEE-1588 PTP protocol allows clocks distributed across a wired network to accurately synchronize time by distributing time stamped messages between nodes. This synchronizing decreases the latency jitter between master and slave PTP systems.

The SoM-215GS provides access to much of the SoM’s I/O through on-board connectors as well as a number of additional I/O expansion blocks such as Video, Touchscreen, Ethernet and micro SD flash disk. Full schematics of the SoM-215GS are provided giving the user a solid base with which to design their own SoM Carrier. Schematics of the SoM-215GS are available.

**Note: to use secondary PTP ethernet a SOM module with support for the PHY is required, Currently this is the SOM-A5D36

EMAC OE Linux with Real Time Preemptive Scheduling enabled and the Precision Time Protocol (PTP) Package added

The Texas Instrumuments TI DP83640 Real Time PHY provides:

Precision Time Protocol (PTP) IEEE-1588
IEEE 1588 V1 and V2 Supported
UDP/IPv4, UDP/IPv6, and Layer2 Ethernet
Packets Supported
IEEE 1588 Clock Synchronization
Timestamp Resolution of 8 ns
Allows Sub 10-ns Synchronization to Master
Reference
12 IEEE 1588 GPIOs for Trigger or Capture
Deterministic, Low Transmit and Receive Latency
Selectable Frequency Synchronized Clock Output
Dynamic Link Quality Monitoring

Although a good deal of customers will want a Carrier that is unique and is designed specifically for their application, the SoM-215GS when coupled with a SoM-A5D36 SODIMM SoM makes for a powerful User Interface Contol System with USB and Ethernet capabilities. This allows the user to gather data and respond with Control commands via the Internet.

When a unique custom board is required, the amount of design work required is greatly minimized by the SoM approach. The custom Carrier designer does not have to worry about the processor, memory, and standard I/O functions and can concentrate on the I/O, connectors and dimensional aspects required for the application.

In situations where a custom Carrier is required but the customer does not have the capability to design such a board in-house, EMAC’s Custom to Order Services (COS) can be utilized. Using COS the customer can select from a library of standard I/O blocks. These blocks can be put together quickly into a form-factor of the customer’s choosing, providing prototypes in as little as 30 days.

___________________________________________________________________________

EMAC is a global leader in system on module and carrier board embedded systems.  The System on Module (SoM) is an ideal alternative to custom engineering. With the SoM approach you get the best of aspects of both buying an Off-The-Shelf Embedded Single Board Computer (SBC) and a Custom Engineered solution. With Off-The-Shelf embedded components such as a generic carrier board and SOM module, it is possible to start development on your software applications before the custom carrier board is complete; thus offering a reduced time to market for your system. A System on Module (SoM) is comprised of a small processor module with CPU bus accessibility and standard I/O functionality. The SoM module does not have any connectorization and is designed to be plugged into a Carrier Board.

Interested in custom engineering? Learn more. 

Search our video library.

Downloads

MANUALS
SoM-215GS_User_Manual_v1.09.pdf

DATA SHEETS
SoM-215GS Datasheet.pdf

Peripheral Options

PRODUCT # DESCRIPTION PRICE
PERIPHERALS
PER-PWR-00041 Brick 30W PS w/ HDD & FDD connector +5/+12 VDC Call
PER-PWR-00032 5V @ 2.5A PS (110V @ 60 Hz US) Call
PER-PWR-00033 5V @ 3.2A PS (100-220V @ 47-63 Hz Intl.) Call
PER-USB-00005 USB WLAN adapter, 802.11 b/g/n Call
PER-USB-00007 USB Bluetooth 4.0 Micro-Adapter Call

You may also like…

All search results