- Onboard 5th Generation Intel® Core™ I3 or i5 Dual Core Processor
- Up to 8GB DDR3L SODIMM
- 4x Serial Ports
- 2x Gigabit Ethernet
- 2x USB 3.0, 4x USB 2.0 Ports
- VGA, DP2 and dual LVDS (Optional)/eDP (Optional)
NRND, Phase out, and EOL SBCs.
-
The EPIC-BDU7, harnesses the full potential of the processors’ Ultra Low Power (ULP) technology to bring its required wattage down to a mere 15W, allowing a fanless configuration.
-
EPIC-SKU7 Board with 6th/7th Generation Intel® Core™ i-U series Processor
- 6th gen Intel® Core™ i5-6200U/Celeron 3855U Processor SoC
- Non-ECC DDR4 onboard (Up to 8GB)
- LVDS/eDP x 1 (Default: LVDS), HDMI x 1
- Intel GbE x 2 (210IT), SATA3 x 1 (7P + 15P right angle connector)
- USB 3.0 x 4 (Rear I/O), USB2.0 x 5 (Header x 1, rest in EXT I/O)
- Touch x 1 (via USB signal), HDA with Amp x 1
-
EPIC-TGH7 Board with Intel® 11th Generation Xeon®/Core™ processors
- 11th gen Intel® Core™ i3, i5, i7-11850HE or Xeon W-11865MRE Processor SoC
- Non-ECC DDR4 onboard (Up to 64GB)
- 2x DP, 1x VGA, 1x LVDS, 1x HDMI
-
GENE-1350 adopts TI OMAP 3503/3530 Processor. This RISC CPU module features low power consumption and cost-efficiency, to fulfill the requirements of hardy and more cost-focusing applications.
- TI OMAP™ 3530 600 MHz
- Onboard 128 MB LP DDR RAM
- Onboard 256 MB NAND Flash, SD, MicroSD
- 1x RS-232, 1x RS-232/422/485 (auto flow), 1x TTL UART
- 2x USB 2.0 Host & 1x USB 2.0 Client
- 1x 10/100Base-TX Ethernet
-
GENE-A55E adopts AMD G-Series T16R single core processor. The system memory is deployed with 204-pin SODIMM DDR3L 1066MHz up to 4 GB. Price is based on 3.5” SubCompact Board with AMD G-series T16R Processor.
- AMD G-series T16R Single Core 615MHz Processor
- Up to 4GB DDR3L SODIMM
- 1x SATA & 1x CompactFlash™
- Dual Gig Ethernet
- 4x USB2.0, 4xCOM, LPT & Mini-PCIe Card
-
EMAC has created the iPac-9302, an inexpensive, feature packed embedded Single Board Computer (SBC) based on the Cirrus EP9302 processor. This ARM9 based board has features, similar to our other Microcontrollers, A/D, PWM, Digital I/O, Serial, USB, and Ethernet. Pricing based on IPAC 9302 IPAC 9302 W/ 16MB FLASH & RAM
- Cirrus Logic EP9302 ARM9 200 Mhz Processor with 100 Mhz System Bus
- 1 RS232 Serial Port with handshake
- 1 RS232/422/485 configurable Serial Port
- 16 MB of External Flash
-
The iPac HCS12 is a powerful Single Board Computer (SBC) based on the Freescale 68HCS12 processor. Although being extremely powerful with ample I/O for demanding applications, this board consumes minimal power, is low cost, and has a small footprint. Pricing based on IPAC HCS12 (MOQ 25)
- Freescale 68HCS12 16 Bit Processor 50 MHz
- 256K Flash programmable, 4K byte EEPROM, 12K of RAM, 96 bytes of battery backed RAM.
- 16 General Purpose HCS12 Digital I/O lines
- 1 RS232 Port and 1 RS232/422/485 port.
-
The MicroPac series of single board computers feature micro size with micro power consumption at a micro price. The MicroPac HC16 has dimensions of 5.35" by 3.66" with a power requirement of 200 mA. typical.
- CMOS 68HC16Z1 with 16.78 MHz clock speed
- Up to 1 MB of Battery Backed RAM and up to 1 MB EPROM/Flash. 64K of RAM included, standard. Also provided are 512 bytes of SEEPROM.
- Fast 8 channel, 10 bit analog to digital converter with an 9 microsecond conversion rate.
- The optional D/A has 8 channels with 8 bit resolution.
-
. MIO-5271 is designed using MI/O Extension form factor (compact series, 146 x 102 mm) and powered by the latest generation of Intel Core U series processors which have low power features but also high performance computing and multimedia capabilities.
- Haswell 4th Gen Intel® Core™ U-series (i5/Celeron®)
- 1 x DDR3L-1600/1333 SO-DIMM support up to 8 GB
- DirectX11.1, OpenGL4.0, OpenCL1.2, 3 independent display: VGA + LVDS + HDMI/Displayport*
- Optimized thermal design with fanless solution for wide temperature
- Flexible design using integrated multiple I/O: MIOe
- Rich I/O interface with: 2x GbE LAN, HD Audio, 4x COM, 2x SATA, SMBus/I2C, 8x GPIO, Half-size Mini PCIe, Full-size Mini PCIe w/ mSATA & 2x USB 3.0
-
The PCM-5536 is an EPIC form factor embedded CPU board for industrial computing. The EPIC standard defines a 4.53" x 6.50" footprint, which sits between the smaller PC/104 and the larger EBX form factor. Pricing based on LX 800 500 MHZ SBC, dual LAN, Audio,COM1 cable, PS/2 cable
- Embedded AMD Geode™ LX 800 Processor
- Up to 1GB DDR333 or 512MB DR400 Memory
- PC/104+ Expansion
- Supports 5 COM, 4x USB 2.0, 2x 10/100 Base-TX Ethernet w/ Optional Gigabit LAN
-
The CPU is EOL for this product, please see this article for more information. The PCM-9375 is based on the AMD LX800 500Mhz CPU and is designed to provide the ideal combination of low power, great performance, widely expanded interfaces and small size for applications that require a small form factor and lower-scale processor support.
- AMD Low Power LX800 500MHz Fanless Processor
- Up to 1GB DDR SDRAM
- Up to 1920x1440 @ 32bb Video
- 4x Serial Ports, 4x USB 2.0, Dual 100 Base-T Ethernet
- PC/104 Expansion
-
The CPU is EOL for this product, please see this article for more information. The PCM-9376 is an AMD G-Series Single Core T16R processor + A55E, DDR3 on-board 1GB SDRAM (optional) or SODIMM up to 4GB.
- AMD G-Series Single Core T16R processor + A55E, DDR3 SODIMM up to 4GB
- DirectX11 supported. 48-bit LVDS, VGA, 18-bit TTL (optional)
- Intel dual GbE, 4 COM, 2 SATA, mSATA
- Expansion: PC/104, mini PCIe, LPC connector for additional COM ports
