ROM-DB5901 – SMARC v2.0 Carrier Board

The ROM-DB5901 is an evaluation carrier board designed for the SMARC v2.0 module. It is compatible with the ROM-5720, ROM-5620 and ROM-5721 SMARC modules and has a multiple I/O interface for evaluation and development. It supports wide range operating temperatures, two power input interfaces, and two MIPI connectors for the camera module.  ROM-DB5901 is an ideal development board for mobile applications, such as portable devices, industrial tablets or HMI systems.  ROM-DB5901 is offered along with RISC SMARC carrier board design documents: carrier board design guide, layout, and schematic checklist, all ready for you to start your own carrier board design. With ROM-DB5901, you will benefit from the power of RISC SMARC modules.

  • SMARC v2.0 CPU module carrier board
  • 4 kinds of display outputs, 18/24-bit LVDS or MIPI DSI, HDMI, DP
  • 1x SATA/SATA-DOM, 2x RJ-45, 4x UART, 12x GPIO
  • 3x PCIe by 1
  • 2x MIPI-SCI2 interfaces for camera module
  • Supports HD audio codec
  • Supports +12V DC and lithium-ion battery power input

Product Variations

Name ROM-DB5901-SW
Price Call
ATTRIBUTES
Form Factor ITX
SOM Connection SODIMM Carrier Boards
Storage 1 SATA III Connector, 1 SD card slot
Serial
Other Serial SPI, I2C
USB 2.0 1x Micro USB Type AB, 2x USB 2.0 Pin Header
USB 3.0 1x USB Type C connector, 1x USB Type A Stacking Connector
Ethernet 2x RJ-45
Expansion slots 3 PCIe by 1
GPIO 1 1/8 Audio Jack (I2 S HD Audio
Audio Support Line-out(L/R), MIC (Realtek ALC892)
Video 1x DP, 2 Single 18/24-bit LVDS/ 2 MIPI DSI, 1x HDMI
Voltage ATX power
Temperature (0°C to 60°C)

Additional information

FORM FACTOR

SMARC

FOR USE WITH

ROM-5620, ROM-5720

DISK INTERFACE

1x SD card slot, 1 SATAIII Connector (with SATA-DOM Support)

AUDIO

1x 1/8 Audio Jack (I2S HD Audio)

VIDEO OUT

18/24-bit LVDS or MIPI DSI, HDMI, DP

TOUCH

see datasheet

FILTER EXPANSION

ETHERNET

2x 1000 BASE-T Ethernet

SECOND ETHERNET

yes

WIRELESS NETWORKING

see datasheet

SERIAL PORTS

2x 4-wires RS-232/422/485, 2x RS-232 Pin Headers

USB 3.0

1x USB Type C Connector (USB 3.0, Output: 5V/9V/12V@3A, Input: 12V/15V/20V@3A), 1x USB Type A Stacking Connector (USB 3.0 & USB 2.0 Host)

USB 2.0

2x USB 2.0 Pin Headers

USB Device/OTG

1x Micro USB Type AB (USB 2.0 OTG)

CAN

2x CAN 2.0B ports, Differential mode +5V

I2C

1x I2C pin header

SPI

1x SPI Pin Header, 1x ESPI Pin Header

GPIO

12 GPIO Ports

SDIO

1x SD card slot

TIMERS/ COUNTERS/ PWM

NA

A D CHANNELS

NA

A/D RESOLUTION

NA

ANALOG MISC.

NA

OTHER I/O

1x 4-lane MIPI CSI, 1x 2-lane MIPI CSI

EXPANSION

3 PCIe x 1

SIZE

12" x 9.6" (305 x 244 mm)

VOLTAGE

12V

POWER MISC.

3 Power Inputs (+12V DC, Type C, Lithium-ion Battery Power Input)

LOW OPERATING TEMPERATURE

-40°C (-40°F)

HIGH OPERATING TEMPERATURE

85°C (185°F)

UPPER OPERATING HUMIDITY

90% relative humidity, non-condensing

ENVIRONMENTAL MISC.

NA

Description

The ROM-DB5901 is an evaluation carrier board designed for the SMARC v2.0 module. It is compatible with the ROM-5720, ROM-5620 and ROM-5721 SMARC modules and has a multiple I/O interface for evaluation and development. It supports wide range operating temperatures, two power input interfaces, and two MIPI connectors for the camera module.  ROM-DB5901 is an ideal development board for mobile applications, such as portable devices, industrial tablets or HMI systems.  ROM-DB5901 is offered along with RISC SMARC carrier board design documents: carrier board design guide, layout, and schematic checklist, all ready for you to start your own carrier board design. With ROM-DB5901, you will benefit from the power of RISC SMARC modules.

  • SMARC v2.0 CPU module carrier board
  • 4 kinds of display outputs, 18/24-bit LVDS or MIPI DSI, HDMI, DP
  • 1x SATA/SATA-DOM, 2x RJ-45, 4x UART, 12x GPIO
  • 3x PCIe by 1
  • 2x MIPI-SCI2 interfaces for camera module
  • Supports HD audio codec
  • Supports +12V DC and lithium-ion battery power input

___________________________________________________________________________

EMAC is a global leader in system on module and carrier board embedded systems.  The System on Module (SoM) is an ideal alternative to custom engineering. With the SoM approach you get the best of aspects of both buying an Off-The-Shelf Embedded Single Board Computer (SBC) and a Custom Engineered solution. With Off-The-Shelf embedded components such as a generic carrier board and SOM module, it is possible to start development on your software applications before the custom carrier board is complete; thus offering a reduced time to market for your system. A System on Module (SoM) is comprised of a small processor module with CPU bus accessibility and standard I/O functionality. The SoM module does not have any connectorization and is designed to be plugged into a Carrier Board.

Interested in custom engineering? Learn more. 

Search our video library.

Downloads

MANUALS

DATA SHEETS
ROM-DB5901_DS.pdf

Peripheral Options

PRODUCT # DESCRIPTION PRICE
PERIPHERALS
96PSA-A60W12R1-1 Adapter 100-240V 60W 12V 5A PLUG 90° Call
1702002605 Power cord 3P EU 183cm Call
1702031801 Power cord 3P UK 183cm Call
1700000237 Power cord 3P PSE 183cm Call
EWM-W163M201E AW-CB260NF, Wireless LAN and BT module Call
1750008717-01 WiFi/BT 2.4+5G, RSMA F (WiFi Antenna) Call
1750008653-01 RSMA F to MHF4 20cm (WiFi Cable) Call
9680015491 PCIe to miniPCIe adapter card Call
IDK-1107WR-40WVA1E 7″ Color TFT-LCD Panel, 800 x 480 Call

You may also like…

All search results