Embedded Single Board Computers

Learn More about SBC’s

FEATURED Product

The RSB-3720 is an Embedded ARM Single Board Computer, with industrial temperature operating range (-40°C to 85°C), in a Pico-ITX 2.5″ SBC size. This Machine Learning Enabled Industrial Temperature ARM 2.5” SBC “Pico-ITX” Sized SBC is powered by NXP i.MX8M Plus; making a very compact Edge AI Solution. Integrating Eyes & Ears for AI requirements, supporting HDMI/LVDS or MIPI-DSI multi-displays and including Industrial I/O interfaces.

LEARN MORE
NameDescriptionPricing
DEV-IIOTC Development Kit
DEV-IIOTC
The DEV-IIOTC Development Kit is based on EMAC’s CutiPy™ which is an ultra-low power Microcontroller-based Single-Board-Computer "SBC" system. This Battery powered system is a low power Industrial IoT Node, ready to get upload data from your system to the cloud. The SoM-iMX6U is based on the STMicroelectronics STM32F407IGH6 ARM Cortex-M4 processor.
  • STMicroelectronics ARM Cortex-M4 168 MHz Low Power
  • 192 KB of SRAM, Up to 1M of Flash
  • Low running power consumption
  • up to 64x GPIO, 4x Serial Ports, 2x USB, SDIO, A/D, SPI, I2C & 2x CAN
  • MicroPython, FreeRTOS or EMAC OE Linux Operating system installed
  • Variations Include: DEV-IIOTC-000, DEV-IIOTC-010
Call
MORE INFO >
IOT-F407C
IOT-F407C
The CutiPy is based on the STMicroelectronics STM32F407IGH6 which is an ARM Cortex-M4 processor running at 168MHz; with 192KB of SRAM, 1MB of internal flash and provides an SD card slot for additional storage.
  • STMicroelectronics ARM Cortex-M4 168 MHz Low Power
  • 192 KB of SRAM, Up to 1M of Flash
  • up to 64x GPIO, 4x Serial Ports, 2x USB, SDIO, A/D, SPI, I2C & 2x CAN
  • Wifi, Bluetooth 5
  • MicroPython, FreeRTOS or EMAC OE Linux Operating system installed
  • Variations Include: IOT-F407C-000, IOT-F407C-001, IOT-F407C-007
Call
MORE INFO >
IPAC-9X25
IPAC-9X25
The iPac-9X25 is an Embedded ARM SBC Single Board Computer, Industrial temperature operation web-enabled microcontroller with the ability to run an embedded server and to display the current monitored or logged data. The web connection is available via two 10/100 BaseT Ethernet ports or 802.11 wireless wifi networking when using the proper Linux modules and adapters. This Microcontroller has all connectors brought out as headers on a board and has the same footprint of a standard PC/104 module at 3.77" x 3.54". The iPAC-9X25 is perfectly suited for Industrial Temperature Embedded Data Acquisition and Control applications. Made in the USA this industrial strength embedded single board computer is based on Atmel AT91SAM9X25 Processor.
  • Atmel AT91SAM9x25 400 Mhz Processor with 133 Mhz System Bus
  • 16MB serial Flash, 128MB DDR2 RAM and 4GB eMMC
  • Variations Include: IPAC-9X25-000
Call
MORE INFO >
RICO-3288
RICO-3288
The RICO-3288 single board computer featuring a compact and slim design, fanless operation, a wide thermal operating envelope with impressive I/O.
  • Rockchip RK3288 ARM Cortex™-A17 Quad-core 1.6GHz
  • 2GB DDR3L Memory & 16GB eMMC Flash Onboard
  • 18/24-bit Dual-Channel LVDS, eDP and HDMI
  • 2x COM Port, 3x USB2.0
  • Optional 7.4V Battery Power Input
  • Optional high accuracy GPS module
Call
MORE INFO >
RSB-3720
RSB-3720 IMX8M Embedded ARM Board
The RSB-3720 IMX8M Embedded ARM Board is an industrial temperature ARM Single board computer, a compact 2.5" SBC is powered by NXP's i.MX 8M Plus Processor with dual or quad ARM Cortex®-A53 based SoC integrated. It is an ideal solution for healthcare, security, IOT gateway and Vending machine application.
  • NXP Arm® Cortex®-A53 i.MX8M Mini Quad/Dual up to 1.8 GHz
  • Onboard LPDDR4 4 GB / 8 GB Memory
  • HDMI 1920x1080 at 60Hz, 1 Single or 1 Dual Channel 24 bit LVDS (or 1 4-Lane MIPI-DSI by BOM Option)
  • 1x 4-wire RS-232/422/485, 1x USB3.2 Gen1 By 1, 1x USB2.0, 1x Micro SD, 1x Mic. in / Line out
  • 1 mini-PCIe with USB, 1x M.2 2230 Key E Slot
  • Supports Yocto Linux and Android
  • Support I/O Expansions boards by UIO40-Express
Call
MORE INFO >
RSB-3730
RSB-3730 IMX8M Embedded ARM Board
The RSB-3730 IMX8M Embedded ARM Board is an industrial temperature ARM Single board computer, with a Machine Learning Enabled, Neural Network Accelerator up to 2.3 TOPS, most compact Edge AI Solution. Integrating Eyes & Ears for AI requirements, supporting HDMI/LVDS or MIPI-DSI multi-displays and including Industrial I/O interfaces.
  • NXP Arm® Cortex®-A53 i.MX8M Plus Quad/Dual up to 1.8 GHz
  • Onboard LPDDR4 4 GB / 6 GB, 4000MT/s memory
  • HDMI 1920x1080 at 60Hz, 1 Single or 1 Dual Channel 24 bit LVDS (or 1 4-Lane MIPI-DSI by BOM Option)
  • 1 4-wire RS-232/422/485, 1 USB3.2 Gen1 By 1, 1 USB2.0, 1 Micro SD, 1 Mic. in / Line out
  • 1 mini-PCIe for 3G/4G, 1 M.2 2230 Key E Slot
  • Supports Yocto Linux and Android
  • Support I/O Expansions boards by UIO40-Express
Call
MORE INFO >
RSB-4220
RSB-4220
RSB-4220 is a 3.5” SBC (Single Board Computer) with TI Sitara AM3352 Cortex A8 1GHz processor. The RSB-4220 can support 512MB DDR3 and 4 GB eMMC onboard flash, LVDS, 5 UARTs, 1 USB 2.0 Client , 2 GbE, 1 SD and Mini PCI-e.
  • TI Sitara™ ARM® AM3352 Cortex®-A8 1.0GHz
  • 512MB DDR3 memory On-board & 4GB eMMC NAND Flash
  • Supports 4GPI / 4GPO with isolation
  • Variations Include: RSB-4220CS, RSB-4220WS
Call
MORE INFO >
RSB-4410
RSB-4410
RSB-4410 is a 3.5” SBC (Single Board Computer) with ARM Cortex-A9 Freescale i.MX6 Dual 1 GHz processor. The RSB-4410 can support 2 GB DDR3 and 4 GB eMMC onboard flash, LVDS, VGA,HDMI display mode, 3 UARTs, 3 USB2.0 Client,1 GbE, 1 SD and MiniPCIe and SIM slot.
  • Freescale ARM® Cortex™ A9 i.MX6 Dual Core Processor
  • 3x USB 2.0 Ports
  • 1x Gigabit Ethernet
  • 3x Serial ports
  • Variations Include: RSB-4410CD-MDA1E, RSB-4410CQ-MEA1E, RSB-4410WD-MDA1E
Call
MORE INFO >
RSB-4411
RSB-4411
RSB-4411 is a 3.5” SBC (Single Board Computer) with ARM Cortex-A9 Freescale i.MX6 Dual/Quad 1 GHz processor. The RSB-4411 can support 1 GB DDR3 and 4 GB eMMC onboard flash, LVDS, VGA,HDMI display mode, 3 UARTs, 3 USB2.0,1 GbE, 1 M.2, 1 SD and MiniPCIe and SIM slot.
  • Freescale ARM® Cortex™ A9 i.MX6 Dual/Quad Core Processor
  • 3x USB 2.0 Ports
  • 1x Gigabit Ethernet
  • 3x Serial ports
  • Variations Include: RSB-4411CD-PN, RSB-4410CQ-PN, RSB-4411WD-ON, RSB-4410WQ-ON
Call
MORE INFO >
RSB-4710
RSB-4710
RSB-4710 is an ARM-based 3.5” SBC (Single Board Computer) with a Rockchip RK3399 processor. Featuring a dual Cortex-A72 and quad Cortex-A53 1.8 GHz processor. The RSB-4710 can support up to 4GB DDR4 and 16 GB eMMC onboard flash, Dual HDMI(4K 60fps + 1080P), LVDS, 6x serial ports, 1x USB 3.0, 4x USB 2.0, 2x GbE, 1 SD and Mini PCI-e.
  • Rockchip RK3399 ARM dual Cortex-A72 and quad Cortex-A53 1.8 GHz
  • up to 4GB DDR4 onboard and 16 GB eMMC onboard flash
  • Supports 5x GPIO
  • Variations Include: RSB-4710CO-XN,, RSB-4710WO-XN, RSB-4710CO-XL, RSB-4710WO-XL
Call
MORE INFO >
RSB-6410
RSB-6410 Embedded ARM Board
RSB-6410 Embedded ARM Board is the world’s first RISC-based Mini-ITX motherboard computer which integrates an NXP i.MX6D/Q Cortex-A9 1.0GHz high performance processor.
  • NXP ARM® Cortex®-A9 i.MX6 Dual/Quad 1GHz high performance processor
  • On board DDR3 1066MHz 1GB/2GB memory and 8GB EMMC NAND flash
  • Supports Triple Display: VGA/HDMI/LVDS
  • Supports 1 x PCIe, 1 x mini-PCIe, 5 x serial ports, 6 x USB, 1 x M.2 socket, 18 x GPIO, 1 x CAN, 1 x PCIe slot
  • Low power consumption, fanless design
  • Supports Linux and Android BSP
Call
MORE INFO >
VAB-600
VAB-600
Featuring an 800MHz ARM Cortex-A9 processor, the VAB-600 combines rich multimedia capabilities and flexible I/O connectivity with a wide operating temperature range and low power consumption to provide a versatile and reliable solution for a wide range of HMI, industrial automation, home automation, and other IoT and M2M applications.
  • WM8950 Cortex A9 processor onboard.
  • Graphics processing (GPU) with Mini-HDMI
  • Android 4.0 and Linux Operating System support
  • Small form factor and low power design
  • Fanless and low power consumption
Call
MORE INFO >
Ordering Information full logo plain

Address:
EMAC, Inc.
2390 EMAC Way
Carbondale, IL 62902

Operating Hours:
Monday – Friday
9:00am to 6:00pm (CST)
Tel: 618-529-4525
Fax: 618-457-0110

General Contact:
Sales: info@emacinc.com
Engineering: info@emacinc.com
Support: support@emacinc.com
Webmaster: webmaster@emacinc.com