-
Designed and manufactured in the USA, the SoM-iMX6U is an ultra low power System on Module (SoM) designed to plug into an EMAC carrier board that contains all the connectors and I/O required for a system. The SoM-iMX6U is based on the Freescale/NXP i.MX6 UltraLite Cortex A7 processor and has ARM Sleep Mode of 3.5mA. A SoM is a small embedded module that contains the core of a microprocessor system. The SoM-iMX6U is industrial wide temperature, ultra-low power 528 MHz module with 4GB of eMMC Flash, 8MB of serial data flash, and 512MB of LP DDR2 RAM. The module has 10/100 BaseT Ethernet, 5x serial ports (4x without handshake and 1x with handshake). The recommended development / carrier board is the SoM-112 or SoM-150 carrier board.
-
The SOM-AGX202 Rogue Carrier for Jetson AGX Orin™ is a full featured carrier board specifically designed for commercially deployable platforms. FEATURES
- Commercially deployable NVIDIA Jetson AGX Orin or AGX Orin Industrial
- 2048 Core Ampere GPU with 64 Tensor Cores and bringing 248 TOPS+ (Jetson AGX Orin Industrial)
- This AI ready Carrier board brings the processing abilities to launch the next generation of AI systems
- Linux OS with BSP (board support package)
- Supports deep learning trained models
-
The SOM-AGX201 Forge Carrier board for NVIDIA Jetson AGX Orin™ is a full featured carrier board specifically designed for commercially deployable platforms.
- NVIDIA Jetson AGX Orin embedded
- 2x 1GBASE-T LAN RJ45 (1G Ethernet)
- 2x 10GBASE-T LAN RJ45 (10G Ethernet)
- 1x USB 3.2 Type-C, 1x USB 3.2 Type-C OTG Capable
- 1x Display port output
- 1x 16-lane MIPI Expansion connector (for MIPI CSI, GMSL2 or FPD-Link III image sensors)
- Linux OS with BSP (board support package)
-
Preliminary- The SOM-950AX Industrial temperature Carrier board for NVIDIA Jetson AGX Orin offers 3x USB 3.2 Type-C ports, Dual-Gigabit LAN ports, M.2 2280 M-Key NVMe slot for storage and an M.2 2230 E-Key slot for expansion on a minimal sized carrier board.. The SOM-950AX Carrier for Jetson AGX Orin™ is a compact sized full-featured carrier board specifically designed for commercially deployable platforms. FEATURES
- NVIDIA Jetson AGX Orin embedded
- NVIDIA 699 pin B2B Connector
- 1x M.2 2280 M-Key NVMe for storage
- 2x 1000 BASE-T LAN RJ45 (Dual Gigabit Ethernet)
- 8x MIPI-CSI2 2-LANE or 4x MIPI-CSI2 4-LANE Cameras)
- 3x USB 3.2 Type-C, 1x USB OTG, 1x UART, 1x CAN-FD
- NVIDIA Jetson AGX Orin embedded
-
The SIB-U3115 system is an ultra compact PC standard that we want to be the future of computing.
- Intel® Atom™ E3826 1.46GHz Dual Core
- DDR3L SODIMM Socket
- 1x RS-232 or 1x RS-422/485
- 1x USB 3.0 Port, 2x USB 2.0 Ports
- 1x HDMI, 1x µHDMI, 1x VGA
- 2x Gigabit Ethernet
-
The SIB-IS270 is a rugged hardware network platform that is powered by the Intel® Apollo Lake.
- Intel® N3350 Processor SoC
- Up to 8 GB DDR3L SODIMM
- 6x 10/100/1000Base-TX Ethernet Port
- 1x CFast™ Socket, 1x 2.5" drive
- 1x Mini-Card Slot with SIM Socket
- Product #: SIB-IS270-000R
-
The FWS-2271 is an affordable, high-performance Network Appliance designed to address the needs of home offices, small and medium businesses, and branch offices.
- Intel® N3350 Processor SoC
- Up to 8 GB DDR3L SODIMM
- 6x 10/100/1000Base-TX Ethernet Port
- 1x CFast™ Socket, 1x 2.5" drive
- 2x Mini-Card Slot (USB Signal only with SIM Socket x 1)
- SIB-FW271-006R
-
The BOXER-8120AI (SIB-A8120) is an Embedded Server fitted with the NVIDIA Jetson TX2, it supports 256 CUDA cores and a range of AI frameworks including Tensorflow, Caffe2, and Mxnet, and in addition, users can install the device with their own AI inference software. These features make the SIB-A8120 perfect for edge AI applications.
- NVIDIA Jetson TX2
- HMP Dual Denver 2 + Quad ARM A57
- 8GB LPDDR4, 32GB eMMC 5.1
- HDMI 2.0
-
Not recommended for new Projects, NRND - The BOXER-8110AI is an Embedded Server fitted with the NVIDIA Jetson TX2, it supports 256 CUDA cores and a range of AI frameworks including Tensorflow, Caffe2, and Mxnet, and in addition, users can install the device with their own AI inference software. Product #: SIB-A8110-0A1-R
- NVIDIA Jetson TX2
- HMP Dual Denver 2 + Quad ARM A57
- 8GB LPDDR4, 32GB eMMC 5.1
- HDMI 2.0, 2x USB3.0
- RS-232 & CANBUS
-
SIB-A2151 is an industrial grade dual core mobile device for in vehicle computer and in vehicle NVR solution. SIB-A2151 support Full-HD NVR solutions and is fully integrated certified hardware and intelligent management software design.
- Intel® Celeron 2980U 1.6GHz / Core i5-4300U 1.9 GHz SoC
- Up to 8GB DDR3L SODIMM
- 2x RS-232/422/485
- 2x USB 3.0 & 2x USB 2.0 Ports
-
SIB-A2150, an intelligent, fanless embedded system powered by Intel Core i3 3217UE/i7 3517UE Dual Core high performance processor with multiple I/O interface.
- Intel Core Processor i7 3517UE 1.7GHz or i3 3217UE 1.6GHz
- Up to 8GB DDR3 SODIMM
- up to 4x RS-232/422/485
- Up to 3x USB 3.0 & 4x USB 2.0
-
Preliminary - The iPac-35D1 is a high-end Edge IIoT Gateway ARM64 SBC "Single Board Computer", Industrial temperature operation web-enabled SBC based on the NuvoTon NuMicro® MA35D1 with dual 64-bit Arm® Cortex®-A35 cores and one 180 MHz Arm® Cortex®-M4 core. Designed and manufactured in the USA by EMAC, Inc; this Microcontroller replacement SBC is an ideal IIoT Edge Gateway system.
- NuvoTon Dual-Core ARM Cortex A35 800MHz & one 180Mhz Cortex M4 Processor
- Up to 16 GB of eMMC Flash & 512MB of DDR3L RAM
- Dual Ethernet (1x 1000 BaseT & 1x 100 BaseT)
- 36x GPIOs & 8 High Drive Outs; A/D, SPI, I2C, i2S, & CAN
- 3x Serial RS232 Ports & 1 RS485 Port
- 2x High Speed USB Ports & 1x SD Card Socket
-
The Mitipy Industrial IoT ARM microcontroller was created to simplify connecting devices and machines to the multitude of systems you find in the Industrial environment.
- STMicroelectronics STM32F407 Cortex-M4 168 MHz Low Power
- Optional Wifi, Bluetooth, Cell Modem SKT w/GPS.
- MicroPython, FreeRTOS or EMAC OE Linux
-
The CutiPy is based on the STMicroelectronics STM32F407IGH6 which is an ARM Cortex-M4 processor running at 168MHz; with 192KB of SRAM, 1MB of internal flash and provides an SD card slot for additional storage.
- STMicroelectronics ARM Cortex-M4 168 MHz Low Power
- 192 KB of SRAM, Up to 1M of Flash
- upto 64x GPIO, 4x Serial Ports, 2x USB, SDIO, A/D, SPI, I2C & 2x CAN
- Wifi, Bluetooth 5
- LCD & Pushbuttons (Optional)
- Rechargeable Battery Backup
- MicroPython, FreeRTOS or EMAC OE Linux
-
Preliminary- IOT-1176P is a dual-purpose SBC board based on NXP's i.MX RT1176 processor.
- NXP i.MX RT1176 Processor
- Arm Cortex-M7 @1GHz & Arm Cortex-M4F @400MHz
- Fast Real-time, low-latency response (12ns)
- 2D GPU and Graphics Accelerator
- MicroPython, FreeRTOS or EMAC OE Linux
-
ECU-150 NXP IMX8 Industrial ARM IOT Gateway is a revolutionary device that is specially designed for limited physical space and temperature concerns.
- NXP i.MX8M Quad Core Processor
- 1.3GHz ARM Cortex-A53
- 2GB DDR4 RAM, 16 GB eMMC onboard
-
The DEV-SOM36 PTP IEEE 1588V2 Development Ki, has the TI DP83640 IEEE 1588 PTP PHYTER onboard, including an optional 4.3 inch WQVGA (480 x 272) TFT color LCD and a resistive touch screen for HMI applications.
- Dual TI DP83640 PTP IEEE-1588v2 Precision Time Protocol PHY
- Atmel ARM Cortex A5 ATSAMA5D36 536MHz
- EMAC OE Linux, Real-time extensions
-
Designed and manufactured in the USA, the DEV-IOT6U development kit is your IOT starting point. Based on EMAC’s SoM-iMX6U which is an ultra low power System on Module (SoM) plugged into the EMAC SOM-112ES carrier board that contains all the connectors and I/O required for a system. The SoM-iMX6U is based on the Freescale/NXP i.MX6 UltraLite Cortex A7 processor and has ARM Sleep Mode of 3.5mA. Price based on following specifications: IOT Development kit, SOM-IMX6U & SOM-112ES, IMX6U 528MHz, 128MB RAM, 4GB eMMC Flash, 4x COM, 2x USB OTG, 10/100 LAN, WiFI, Bluetooth.
- Freescale ARM Cortex A7 iMX6 UltraLite 528Mhz Processor
- 3.5mA APM Sleep
- Low running power consumption
- 3x serial ports, 3x USB 2.0 ports
- IIoT Gateway processor
-
The DEV-IIOTC Industrial Microcontroller Development Kit is based on EMAC’s CutiPy™ which is an ultra-low power Microcontroller-based Single-Board-Computer "SBC" system. This Battery powered system is a low-power Industrial IoT Node, ready to get upload data from your system to the cloud. The SoM-iMX6U is based on the STMicroelectronics STM32F407IGH6 ARM Cortex-M4 processor. Bring your system up to Industry 4.0 IIoT connectivity with the simple incorporation of the CutiPy™ to your existing product.
- STMicroelectronics ARM Cortex-M4 168 MHz Low Power
- 192 KB of SRAM, Up to 1M of Flash
- Low running power consumption
- up to 64x GPIO, 4x Serial Ports, 2x USB, SDIO, A/D, SPI, I2C & 2x CAN
- MicroPython, FreeRTOS or EMAC OE Linux Operating system installed
-
The DEV-710AIL-NANO NVIDIA Jetson Nano AI Development Kit. The MIC-710AIL-DVA1 supports deep learning trained models.
- NVIDIA Jetson Nano embedded
- Quad-Core ARM Cortex A57 MPCore NEON
- Maxwell 128 CUDA Core Vulkan 1.1 GPU
- Linux OS with BSP (board support package)
- Supports deep learning trained models
-
The AIV-TGH7B Fanless Vehicle 11th Gen Intel Core I Series processor is a fanless computer for in-vehicle and edge computing applications.
- Intel® 11th Generation Core™ i7/i5/i3 Processor
- DDR4 3200 SODIMM, up to 32GB
- Support 2.5GbE, USB 3.2 Gen2 x 4
- Triple Display : HDMI 2.0b x 1 , DP++ 1.2a x 2
- Two front easy access 2.5” SATA III storage bay
- Wide Temperature design : -40°C to 65°C
- Wide Voltage Power Input : 9-24Vdc
- Fanless design
✆ Get in touch today: (618) 529-4525|info@emacinc.com
