COM-BT CPU Board is a Type 6 COM Express module. It has an eDP interface allowing closed connection between the display device and the board ensuring that it is free from any external interference. COM-BT CPU Board is also capable of converting video signal through DDI0 and DDI1 going to DVI, DP, or HDMI gadgets or devices. COM-BT adopts the latest Intel® Celeron® J1900, N2930, N2807 and Atom™ E3800 Series product family. The system memory deploys with one DDR3L 1066/1333 MHz SODIMM up to 8 GB (4GB max for E3815/E3825/N2807). In addition, Intel® I211 supports Gigabit Ethernet that allows faster network connections. This model applies four PCI-Express〔x1〕 (one shared with Gigabit LAN). Moreover, two SATA 3.0Gb/s are configured on the COM-BT. COM-BT also equips USB2.0 x6, USB 3.2 Gen 1 x1 (combine USB2.0 x1) for flexible I/O expansions.

• Intel® Atom™/ Celeron® Processor SoC
• DDR3L 1066/1333 MHz SODIMM x 1, Up to 8 GB
• Gigabit Ethernet with Intel® Controller
• CRT, Up to 24-bit Dual-channel LVDS, eDP (Optional), up to DDI x 2 (Share w/ eDP LVDS)
• High Definition Audio Interface
• SATA 3.0 Gb/s x 2
• USB 2.0 x 7, USB 3.2 Gen 1 x 1
• PCI-Express [x1] x 3
• COM Express Compact Module, Pin-out Type 6, COM.0 Rev. 2.1

COM-UCEBT adopts the latest Intel® Bay Trail Atom™ N2000/E3800 processor. The system memory deploys with onboard DDR3L 2 GB memory. In addition, Intel® I211/i210 supports 10/100/1000Base-TX that allows faster network connections. This model applies three PCI-Express〔x1〕, one LPC bus, and one SMBus. Moreover, two SATA 3.0Gb/s are configured on the COM-UCEBT. COM-UCEBT also equips six USB2.0 and one USB2.0/3.0 bus for flexible I/O expansions. The display of COM-UCEBT supports CRT/LCD simultaneous/ dual view display. This brand new COM Express Module is developed to cater to the requirements of Automation, Medical, ticket machine, transportation, gaming, KIOSK, and POS/POI applications.

• Intel® Atom™ E3800 Product Family/Celeron® N2000 Series SoC Processor
• COM Express Pin-out Type 10
• Onboard DDR3L 2 GB Memory
• Gigabit Ethernet
• 18/24-bit Single Channel LVDS LCDs & DDI
• 2x SATA, eMMC (Optional)
• 1x USB 2.0/USB 3.0 & 6 x USB2.0, GPIO 8-bit, 3 x PCI-Express [x1]

The COMe-cAL6 COM Express compact Type 6 module is highly scalable and covers the entire range of Intel's latest IoT-ready embedded processors. A broad range of module variants, based on five different processor types, make up the COMe-cAL6 portfolio. Versions range from a cost optimized dual-core Intel Celeron (2x 1.1/2.4 GHz with 6W TDP) iteration optimized for energy-sensitive applications to genuine quad-core Intel Atom (4x 1.6/2.0 GHz with 12W TDP) and Intel Pentium (4x 1.1/2.5 GHz with 6W TDP) versions for high-end applications.

• Intel Apollo Lake Pentium, Celeron, Atom E3900
• Low-power – performance/watt optimized form factor solution
• 2x SODIMM Up to 8 GByte DDR3L
• Triple Display outputs
• Industrial grade temperature

NANOCOM-SKU - COM Express Type 10 Module with the 6th Gen Intel® Core™ Series CPUs. Traditionally powered by SoCs instead of a full-fledged processor due to the limited area, which measures 84 x 55 mm (equivalent to a business card), the NanoCOM-SKU, the latest entry to the company’s NanoCOM product line, greatly improves on that with an Intel® Core™ i7-6600U CPU, along with a maximum of 4 GB of onboard DDR4 memory while drawing about 18W of power in full loading, a string of feats still unheard of in the embedded community. SKUs with other Core processors and RAM are also available.

• 6th Generation Intel® Core™ ULT Series Processor
• Onboard 4GB DDR4 2133 Memory
• Gigabit Ethernet x 1
• 18/24-bit Single-Channel LVDS LCDs/eDP, DDI x 1
• High Definition Audio Interface
• SATA x 2
• USB 3.2 Gen 1 x 2, USB2.0 x 8
• PCI-Express [x1] x 4
• GPIO x 8, SMbus, I2C, LPC
• COM Express Type 10
• Mini Size, 84mm x 55mm
• Supports Industrial Grade Temperature

The ROM-5720 SMARC 2.0/2.1 Computer-on-Module is powered by NXP iMX8 CPU based on the i.MX8M SOC which includes dual and quad-core Arm Cortex-A53 processors in combination with one Cortex-M4 real time processor and Vivante GC7000 Lite 3D Graphics engine.

• NXP i.MX 8M processor with dual or quad ARM Cortex A53 cores
• Onboard 2GB LPDDR4 memory and eMMC 16GB
• Supports Yocto Linux, Android and Microsoft Windows 10 IoT Base

The ROM-5722 NXP IMX8M Plus SMARC 2.1 Computer-on-Module is powered by NXP i.MX8M Plus SOC which includes up to 4 Arm Cortex-A53 cores in combination with one Cortex-M7 real-time processor and Vivante GC7000UL graphics engine. The ROM-5722 industrial ARM System-On-Module provides USB2.0, USB3.2 Gen1By1, dual Gigabit Ethernet, MIPI-CSI, PCI Express, and Dual channel LVDS shared with MIPI-DSI for embedded applications.

• NXP i.MX 8M Plus processor with dual or quad ARM Cortex A53 cores
• 1x Arm Cortex-M7 core
• up to 6 GB LPDDR4 Onboard memory and 16 GB eMMC Storage
• Neural network accelerator up to 2.3 TOPS
• Supports Yocto Linux, Android and Microsoft Windows 10 IoT Base

The ROM-7720 industrial temperature ARM system-on-Module is powered by NXP's i.MX8 QuadMax Processor, which compose eight cores, including 2 ARM Cortex-A72 cores, 4 Cortex-A53 cores and 2 Cortex-M4F cores into one single package. ROM-7720 also escalate its graphic performance by dual 32-core GPU subsystems, 4K H.265 capable VPU, and dual failover-ready display controllers. The enhanced HAB secure & encrypted boot bring you a worry-free module platform for surveillance an video analysis application.

• NXP IMX8 ARM Cortex-A72 + A53 i.MX8 QuadMax 1.6GHz high performance processor
• Onboard DDR4 memory 2 GB
• Onboard eMMC NAND Flash 8 GB
• HDMI 4K, Dual Channel 24bit LVDS
• 1x 10/100/1000 Mbps Ethernet; 2x PCIe x1 Gen2

The SoM-112ES is a compact, low-power SoM Carrier/Socket board with WiFi and Bluetooth connectivity onboard, and MikroBUS expansion. This versatile SoM Carrier/Socket board is ideal for evaluation and early development work. This Carrier is designed to work with all EMAC 144-pin SODIMM type SoMs. Note: The SoM-112ES is specifically designed for SoMs with APM sleep capability and utilizes GPIO controllable IO to further reduce sleep current draws. The SoM-112ES provides access to much of the SoM's I/O through on-board connectors as well as a number of additional I/O expansion blocks such as Wireless Networking, Gigabit Ethernet, MikroBUS modules, and HCSD/MMC flash disk.

• 4x Serial Ports
• 3x USB Host ports & 1x USB Device Port
• 10/100 BaseT Ethernet with onboard Magnetics and RJ45
• Wifi/BT & CAN 2.0B Port
• General I/O: GPIOs, SPI, A/D, D/A, PWM, I2C, I2S
• MikroBus Expansion

The SoM-150ES is versatile SoM Carrier/Socket board ideal for evaluation and early development work. This Carrier is designed to work with all EMAC 144-PIN SODIMM type SoMs. Note: The SoM-150 is specifically designed for SoMs with USB capability.  The SoM-150ES provides access to all the SoM's I/O through on-board connectors as well as a number of additional I/O expansion blocks such as A/D, D/A, Digital I/O, Audio CODEC, and MMC/SD flash disk. Although a good deal of customers will want a Carrier that is unique and is designed specifically for their application, the SoM-150ES when coupled with a 144-PIN SODIMM SoM makes for a powerful Remote Data Acquisition and Control system with USB and Ethernet capabilities. This allows the user to gather data and respond with Control commands via the Internet. An Enclosure and Power Supply will be available options for the SoM-150ES. When a unique custom board is required for an application, the amount of design work required is greatly minimized by the SoM approach. The custom Carrier designer does not have to worry about the processor, memory, and standard I/O functions and can concentrate on the I/O, connectors and dimensional aspects required for the application. In situations where a custom Carrier is required but the customer does not have the capability to design such a board in-house, EMAC's Custom to Order Services (COS) can be utilized (see Custom Carrier example on right). Using COS the customer can select from a library of standard I/O blocks. These blocks can be put together quickly into a form-factor of the customer's choosing, providing prototypes in as little as 30 days.

• 4 serial RS232 ports and 1 RS232/485 port
• 24, General Purpose digital (PLD) I/O lines
• 10/100 BaseT Ethernet with onboard Magnetics and RJ45
• 24 Digital general purpose SoM I/O lines
• CAN 2.0B Port