- NXP Arm® Cortex®-A55 i.MX95 Six Cores up to 2.0 GHz
- 1x Arm Cortex-M7 core & 1 x Cortex-M33 core
- 1x 10 Gigabit Ethernet, 2x Gigabit LAN
- 1x 4-lane MIPI-DSI/HDMI , 1x Dual channel LVDS
- 1x 4-Lane MIPI-CSI camera input
- MXM3.0 Connector-314pin
- Neural network accelerator built-in
- Supports Yocto Linux
A System on a module (SoM) also known as a Computer on Module(CoM) for x86 and RISC On Module(RoM) for ARM is an ideal alternative to custom engineering. With the SoM approach, you get the best of buying an Off-The-Shelf Single Board Computer (SBC) and a Custom Engineered solution. With Off-The-Shelf standard components such as a generic carrier board and SOM module, it is possible to start development on your software applications before the custom carrier board is complete; thus offering a reduced time to market for your system.
A System on Module (SoM), Computer on Module(CoM), or RISC On Module(RoM), is a small processor board built with a processor, memory, and hardware to start basic functions in the processor and provide standard I/O functionality. The SoM module does not have any connectorization and is designed to be plugged into a Carrier Board, (also known as a development board or Base board). The Carrier Board contains the I/O connectors as well any other I/O requirement not provided on the SoM itself. The SOM approach with a Computer on module offers a reduced risk of an End-of-life product due to a memory, flash, chipset, CPU or other components going end-of-life. With the ability to swap in another CPU SOM or Computer on Module board, the system can be running just as it was with no or minimal changes to the carrier board. This also offers scalability by offering a range of processor speeds and features in the same packages. These features offer scalability to allow a company to offer the same carrier board with multiple speed cores for similar products, allowing the economy of scale to bring down per-unit pricing.
-
Preliminary- The AOM-3511 NXP IMX95 AI-on-Module Nano is a state-of-the-art AI-on-Module, incorporating the robust NXP i.MX95 System-on-Chip (SOC). This SOC features an impressive configuration, with up to six Arm Cortex-A55 cores, accompanied by a dedicated Cortex-M7 and M33 real-time processor, and an added Neural Network accelerator.
-
The SMARC-sXBTi Computer-on-Modules has been developed to comply with the SGET specification and is equipped with Intel® Atom™ processor E3800 series and up to 8 GB RAM, optional with ECC. They support the extended temperature range of -40°C to +85°C, measure only 82mm x 50mm and have an especially low-profile design thanks to the use of edge card connectors. Nevertheless, there is still enough space for up a 64GB on-board SSD to store OS and application data.
- Intel ATOM 3800 Series SOC
- up to 8GB DDR3L onboard
- 1x USB 3.0 & 3x USB 2.0
- eMMC Flash, SDIO, 2x SATA
- Industrial Temperature Option
-
COM-BT CPU Board is a Type 6 COM Express module. It has an eDP interface allowing closed connection between the display device and the board ensuring that it is free from any external interference. COM-BT CPU Board is also capable of converting video signal through DDI0 and DDI1 going to DVI, DP, or HDMI gadgets or devices. COM-BT adopts the latest Intel® Celeron® J1900, N2930, N2807 and Atom™ E3800 Series product family. The system memory deploys with one DDR3L 1066/1333 MHz SODIMM up to 8 GB (4GB max for E3815/E3825/N2807). In addition, Intel® I211 supports Gigabit Ethernet that allows faster network connections. This model applies four PCI-Express〔x1〕 (one shared with Gigabit LAN). Moreover, two SATA 3.0Gb/s are configured on the COM-BT. COM-BT also equips USB2.0 x6, USB 3.2 Gen 1 x1 (combine USB2.0 x1) for flexible I/O expansions.
- Intel® Atom™/ Celeron® Processor SoC
- DDR3L 1066/1333 MHz SODIMM x 1, Up to 8 GB
- Gigabit Ethernet with Intel® Controller
- CRT, Up to 24-bit Dual-channel LVDS, eDP (Optional), up to DDI x 2 (Share w/ eDP LVDS)
- High Definition Audio Interface
- SATA 3.0 Gb/s x 2
- USB 2.0 x 7, USB 3.2 Gen 1 x 1
- PCI-Express [x1] x 3
- COM Express Compact Module, Pin-out Type 6, COM.0 Rev. 2.1
-
COM-UCEBT adopts the latest Intel® Bay Trail Atom™ N2000/E3800 processor. The system memory deploys with onboard DDR3L 2 GB memory. In addition, Intel® I211/i210 supports 10/100/1000Base-TX that allows faster network connections. This model applies three PCI-Express〔x1〕, one LPC bus, and one SMBus. Moreover, two SATA 3.0Gb/s are configured on the COM-UCEBT. COM-UCEBT also equips six USB2.0 and one USB2.0/3.0 bus for flexible I/O expansions. The display of COM-UCEBT supports CRT/LCD simultaneous/ dual view display. This brand new COM Express Module is developed to cater to the requirements of Automation, Medical, ticket machine, transportation, gaming, KIOSK, and POS/POI applications.
- Intel® Atom™ E3800 Product Family/Celeron® N2000 Series SoC Processor
- COM Express Pin-out Type 10
- Onboard DDR3L 2 GB Memory
- Gigabit Ethernet
- 18/24-bit Single Channel LVDS LCDs & DDI
- 2x SATA, eMMC (Optional)
- 1x USB 2.0/USB 3.0 & 6 x USB2.0, GPIO 8-bit, 3 x PCI-Express [x1]
-
The COMe-cAL6 COM Express compact Type 6 module is highly scalable and covers the entire range of Intel's latest IoT-ready embedded processors. A broad range of module variants, based on five different processor types, make up the COMe-cAL6 portfolio. Versions range from a cost optimized dual-core Intel Celeron (2x 1.1/2.4 GHz with 6W TDP) iteration optimized for energy-sensitive applications to genuine quad-core Intel Atom (4x 1.6/2.0 GHz with 12W TDP) and Intel Pentium (4x 1.1/2.5 GHz with 6W TDP) versions for high-end applications.
- Intel Apollo Lake Pentium, Celeron, Atom E3900
- Low-power – performance/watt optimized form factor solution
- 2x SODIMM Up to 8 GByte DDR3L
- Triple Display outputs
- Industrial grade temperature
-
The DEV-710AIL-NANO NVIDIA Jetson Nano AI Development Kit. The MIC-710AIL-DVA1 supports deep learning trained models.
- NVIDIA Jetson Nano embedded
- Quad-Core ARM Cortex A57 MPCore NEON
- Maxwell 128 CUDA Core Vulkan 1.1 GPU
- Linux OS with BSP (board support package)
- Supports deep learning trained models
-
Designed and manufactured in the USA, the DEV-IOT6U development kit is your IOT starting point. Based on EMAC’s SoM-iMX6U which is an ultra low power System on Module (SoM) plugged into the EMAC SOM-112ES carrier board that contains all the connectors and I/O required for a system. The SoM-iMX6U is based on the Freescale/NXP i.MX6 UltraLite Cortex A7 processor and has ARM Sleep Mode of 3.5mA. Price based on following specifications: IOT Development kit, SOM-IMX6U & SOM-112ES, IMX6U 528MHz, 128MB RAM, 4GB eMMC Flash, 4x COM, 2x USB OTG, 10/100 LAN, WiFI, Bluetooth.
- Freescale ARM Cortex A7 iMX6 UltraLite 528Mhz Processor
- 3.5mA APM Sleep
- Low running power consumption
- 3x serial ports, 3x USB 2.0 ports
- IIoT Gateway processor
-
The DEV-SOM36 PTP IEEE 1588V2 Development Ki, has the TI DP83640 IEEE 1588 PTP PHYTER onboard, including an optional 4.3 inch WQVGA (480 x 272) TFT color LCD and a resistive touch screen for HMI applications.
- Dual TI DP83640 PTP IEEE-1588v2 Precision Time Protocol PHY
- Atmel ARM Cortex A5 ATSAMA5D36 536MHz
- EMAC OE Linux, Real-time extensions
-
NANOCOM-SKU - COM Express Type 10 Module with the 6th Gen Intel® Core™ Series CPUs. Traditionally powered by SoCs instead of a full-fledged processor due to the limited area, which measures 84 x 55 mm (equivalent to a business card), the NanoCOM-SKU, the latest entry to the company’s NanoCOM product line, greatly improves on that with an Intel® Core™ i7-6600U CPU, along with a maximum of 4 GB of onboard DDR4 memory while drawing about 18W of power in full loading, a string of feats still unheard of in the embedded community. SKUs with other Core processors and RAM are also available.
- 6th Generation Intel® Core™ ULT Series Processor
- Onboard 4GB DDR4 2133 Memory
- Gigabit Ethernet x 1
- 18/24-bit Single-Channel LVDS LCDs/eDP, DDI x 1
- High Definition Audio Interface
- SATA x 2
- USB 3.2 Gen 1 x 2, USB2.0 x 8
- PCI-Express [x1] x 4
- GPIO x 8, SMbus, I2C, LPC
- COM Express Type 10
- Mini Size, 84mm x 55mm
- Supports Industrial Grade Temperature
-
The ROM-2620 IMX8 Arm SOM OSM 1.1 Computer-on-Module is powered by NXP i.MX 8ULP SoC which includes up to 2 Arm Cortex-A35 cores in combination with one Cortex-M33 real-time processor and Vivante GC7000 nanoULTRA/GC328 graphics engine. It provides USB2.0, Fast Ethernet, MIPI-CSI, I2C, SPI, GPIO, PWM and MIPI DSI display for embedded applications.
- NXP Arm® Cortex®-A35 i.MX 8ULP Dual up to 1.0 GHz with 1x Arm Cortex-M33 core
- Onboard LPDDR4 1GB, 2000MT/s memory
- 1x 4 lane MIPI-DSI
- 1x USB2.0, 1x USB 2.0 OTG, 5x UART, 2x I2C, 24 x GPIO, 6x PWM, 1x CAN
- Ultra-small size form factor - OSM
- Support Ycoto Linux
-
The ROM-2820 ARM IMX9 OSM SOM is a 1.1 Computer-on-Module is powered by NXP iMX93 SoC which includes Cortex-A55 Dual-core in combination with one Cortex-M33 real-time processor, Ethos®-U65 Neural Processing Unit (NPU) and 2D graphics engine. It provides USB2.0, Gigabit Ethernet, MIPI-CSI, I2C, SPI, GPIO, CAN-FD and MIPI DSI display for embedded applications.
- NXP i.MX 93 Cortex-A55 Dual-core (up to 1.7GHz)
- 1x Arm Cortex-M33 core(250MHz)
- 1x Ethos®-U65 microNPU
- 2GB LPDDR4X up to 3733MT/s on SOM
- 1x 4 lane MIPI-DSI
- Compact size form factor - OSM Size L (45 x 45 mm)
- Support Ycoto Linux
-
ROM-5420 series SMARC module has an integrated NXP i.MX6 Cortex-A9 SoC. NXP i.MX6 supports 2D/3D graphics accelerators, a full HD 1080p encode/decode hardware engine and two independent display ouputs. ROM-5420 series support security protection and it protects user image from plagiarism. The camera input and power input +3V~5.25V support are specially designed for portable applications.
- Freescale/NXP ARM i.MX6 processor
- Up to 2GB Onbard DDR3
- Parallel RGB, HDMI & LVDS
- Supports 4 GB eMMC Flash, 1 SD/MMC, 1 SATA
- 2x CAN, 4x UART, 5x I2C, 12x GPIO, 1x PCIe,
- 1x Camera input
- Gigabit LAN
-
The ROM-5620 SMARC 2.0/2.1 Computer-on-Module is powered by NXP i.MX 8X SoC which includes two to four Arm Cortex-A35 cores for mid-range automotive and industrial market segments, one Cortex-M4F core for real-time processing, and one Tensilica Hi-Fi 4 DSP for efficient audio and voice codec execution. It also escalates its graphic performance by Vivante GC7000 Lite, 4K H.265 capable decoder, and dual 1080P60 display controller.
- NXP i.MX 8 XPlus processor with dual or quad ARM Cortex A35 cores
- 1 x Arm Cortex-M4F core
- Tensilica® HiFi 4 DSP
- Onboard 2GB LPDDR4 memory and eMMC 16GB
- 2x LVDS, 2x 4-Lane MIPI DSI
- Support OpenGL ES 3.1/3.0/2.0/1.1 and Open CL 1.2, and Vulkan hardware accelerators
- Supports 4K hardware decode engine
- Supports Linux and Android BSP
-
The ROM-5720 SMARC 2.0/2.1 Computer-on-Module is powered by NXP iMX8 CPU based on the i.MX8M SOC which includes dual and quad-core Arm Cortex-A53 processors in combination with one Cortex-M4 real time processor and Vivante GC7000 Lite 3D Graphics engine.
- NXP i.MX 8M processor with dual or quad ARM Cortex A53 cores
- Onboard 2GB LPDDR4 memory and eMMC 16GB
- Supports Yocto Linux, Android and Microsoft Windows 10 IoT Base
-
The ROM-5722 NXP IMX8M Plus SMARC 2.1 Computer-on-Module is powered by NXP i.MX8M Plus SOC which includes up to 4 Arm Cortex-A53 cores in combination with one Cortex-M7 real-time processor and Vivante GC7000UL graphics engine. The ROM-5722 industrial ARM System-On-Module provides USB2.0, USB3.2 Gen1By1, dual Gigabit Ethernet, MIPI-CSI, PCI Express, and Dual channel LVDS shared with MIPI-DSI for embedded applications.
- NXP i.MX 8M Plus processor with dual or quad ARM Cortex A53 cores
- 1x Arm Cortex-M7 core
- up to 6 GB LPDDR4 Onboard memory and 16 GB eMMC Storage
- Neural network accelerator up to 2.3 TOPS
- Supports Yocto Linux, Android and Microsoft Windows 10 IoT Base
-
The ROM-7720 industrial temperature ARM system-on-Module is powered by NXP's i.MX8 QuadMax Processor, which compose eight cores, including 2 ARM Cortex-A72 cores, 4 Cortex-A53 cores and 2 Cortex-M4F cores into one single package. ROM-7720 also escalate its graphic performance by dual 32-core GPU subsystems, 4K H.265 capable VPU, and dual failover-ready display controllers. The enhanced HAB secure & encrypted boot bring you a worry-free module platform for surveillance an video analysis application.
- NXP IMX8 ARM Cortex-A72 + A53 i.MX8 QuadMax 1.6GHz high performance processor
- Onboard DDR4 memory 2 GB
- Onboard eMMC NAND Flash 8 GB
- HDMI 4K, Dual Channel 24bit LVDS
- 1x 10/100/1000 Mbps Ethernet; 2x PCIe x1 Gen2
-
ROM-DB5901 SMARC Development carrier board designed for evaluation of the SMARC v2.0 modules. It supports a wide range of operating temperatures, two power input interfaces, and two MIPI connectors for the camera module. ROM-DB5901 is an ideal development board for mobile applications, such as portable devices, industrial tablets or HMI systems.
- 4 kinds of display outputs, 18/24-bit LVDS or MIPI DSI, HDMI, DP
- 2x MIPI-SCI2 interfaces for camera module
- Supports +12V DC and lithium-ion battery power input
- Operating Temperature -40°C to 85°C
-
Mini-ITX Qseven V2.1 Carrier Board Development board for RISC Qseven module series
- Supports Qseven V2.1 RISC module
- Mini-ITX form factor
- Dual display outputs HDMI 2.0 and 24-bit LVDS
- Supports 1 x PCIe, 1 x GbE, 4 x USB 2.0, 1 x USB OTG2.0, 1 x SATAII, 1 x I2C, 1 x I2S, 1 x CANbus, 8 x GPIOs
- Support AT/ATX mode, Input power +12V
-
The SSOM-1062M RT1062 ARM Microcontroller SoM is an ARM System on Module (SoM) based on the RT1062 Microcontroller (MCU)
- RT1062 ARM CortexM7 600 MHz Crossover MCU Microcontroller Processor
- 2x 100-BaseT Ethernet Ports(1x with PHY in module, 1x RMII output)
- 1x Wifi/Bluetooth Radio (Optional)
- Industrial Temperature -40 to +85
-
The SoM-112ES is a compact, low-power SoM Carrier/Socket board with WiFi and Bluetooth connectivity onboard, and MikroBUS expansion. This versatile SoM Carrier/Socket board is ideal for evaluation and early development work. This Carrier is designed to work with all EMAC 144-pin SODIMM type SoMs. Note: The SoM-112ES is specifically designed for SoMs with APM sleep capability and utilizes GPIO controllable IO to further reduce sleep current draws. The SoM-112ES provides access to much of the SoM's I/O through on-board connectors as well as a number of additional I/O expansion blocks such as Wireless Networking, Gigabit Ethernet, MikroBUS modules, and HCSD/MMC flash disk.
- 4x Serial Ports
- 3x USB Host ports & 1x USB Device Port
- 10/100 BaseT Ethernet with onboard Magnetics and RJ45
- Wifi/BT & CAN 2.0B Port
- General I/O: GPIOs, SPI, A/D, D/A, PWM, I2C, I2S
- MikroBus Expansion
-
The SoM-150ES is versatile SoM Carrier/Socket board ideal for evaluation and early development work. This Carrier is designed to work with all EMAC 144-PIN SODIMM type SoMs. Note: The SoM-150 is specifically designed for SoMs with USB capability. The SoM-150ES provides access to all the SoM's I/O through on-board connectors as well as a number of additional I/O expansion blocks such as A/D, D/A, Digital I/O, Audio CODEC, and MMC/SD flash disk. Although a good deal of customers will want a Carrier that is unique and is designed specifically for their application, the SoM-150ES when coupled with a 144-PIN SODIMM SoM makes for a powerful Remote Data Acquisition and Control system with USB and Ethernet capabilities. This allows the user to gather data and respond with Control commands via the Internet. An Enclosure and Power Supply will be available options for the SoM-150ES. When a unique custom board is required for an application, the amount of design work required is greatly minimized by the SoM approach. The custom Carrier designer does not have to worry about the processor, memory, and standard I/O functions and can concentrate on the I/O, connectors and dimensional aspects required for the application. In situations where a custom Carrier is required but the customer does not have the capability to design such a board in-house, EMAC's Custom to Order Services (COS) can be utilized (see Custom Carrier example on right). Using COS the customer can select from a library of standard I/O blocks. These blocks can be put together quickly into a form-factor of the customer's choosing, providing prototypes in as little as 30 days.
- 4 serial RS232 ports and 1 RS232/485 port
- 24, General Purpose digital (PLD) I/O lines
- 10/100 BaseT Ethernet with onboard Magnetics and RJ45
- 24 Digital general purpose SoM I/O lines
- CAN 2.0B Port
-
The SoM-200GS is a compact, low-power SoM Carrier/Socket board with a optional 4.3 inch WQVGA (480 x 272) color LCD and resistive touch screen. This versatile SoM Carrier/Socket board is ideal for evaluation and early development work. This Carrier is designed to work with all EMAC 200-pin SODIMM type SoMs. Note: The SoM-200GS is specifically designed for SoMs with Video & USB capability. 4x Serial Ports 1x Gigabit Ethernet 2x USB 2.0 Hosts & 1x USB OTG Port Up to 56 GPIO Lines 1x SD Flash Card Socket [optional] WiFi 802.11 b/g/n [optional] Bluetooth 3.0 + High Speed [optional]
-
The SoM-210ES is an ultra compact SoM Carrier/Socket board with an optional 4.3 inch WQVGA (480 x 272) TFT color LCD and a resistive touch screen. The dimensions of the SoM-210 are 4.8" by 3.0", about the same dimensions as that of popular touch cell phones. The SoM-210 is small enough to fit in a 2U rack enclosure. This versatile SoM Carrier/Socket board is ideal for evaluation and early development work. This Carrier is designed to work with all EMAC 200-pin SODIMM type SoMs. Note: The SoM-210 is specifically designed for EMAC SoMs with Video & USB capability.
- 2x serial RS232 ports and 1x RS232/485 port
- 32x SoM Specific lines with JTAG
- 10/100 BaseT Ethernet with onboard Magnetics and RJ45
- Up to 3 USB 2.0 Hosts
-
The SoM-212ES is an ultra compact SoM Carrier/Socket board with an optional 4.3 inch WQVGA (480 x 272) TFT color LCD and a resistive touch screen. The dimensions of the SoM-212 are 4.8" by 3.0", about the same dimensions as that of popular touch cell phones. The SoM-212ES is small enough to fit in a 2U rack enclosure. This versatile SoM Carrier/Socket board is ideal for evaluation and early development work. This Carrier is designed to work with all EMAC 200-pin SODIMM type SoMs. Note: The SoM-212ES is specifically designed for SoMs with Video & USB capability.
- 3 serial RS232 ports and 1 RS232/485 port
- 32 SoM Specific lines with JTAG
- 10/100 BaseT Ethernet with onboard Magnetics and RJ45
- USB OTG Host/Device Port
- POE & Audio In/Out (Optional)
